BIONIME GM550 Manual do Utilizador descarregar pdf (Página 14)

11. A blood drop symbol appears and is accompanied by a

further beep (if volume is turned on). Now you can apply

the blood sample within 2 minutes.

12. Place the lancing device against your fingertip and press

the release button.

13. Touch and hold the drop to the edge of sample entry until

you hear a " beep " (if volume is turned on) and the View

Window is totally filled with blood. If the View Window is

not totally filled with blood or the test does not start,

please discard the test strip and repeat the test with a new

test strip.

14. You will see the countdown mode on the screen. After 5

seconds, the test result appears.

Performing a Blood Test Performing a Blood Test

15. Pull off the depth adjustable cap. Without touching the used

disposable lancet, stick the lancet tip into the protective

cover.

16. Holding the release button in one hand I (see picture 16,

step 1) and pulling on the plunger in the other hand (see

picture 16, step 2) will safely eject the used disposable

lancet.

17. Discard the used disposable lancet into an appropriate

puncture-proof or biohazard container.

18. Replace the depth adjustable cap after finishing the test.

PRECAUTION

- Do not apply your blood drop to the sample entry on the strip

until you see the " appear. The meter is performing an

internal test and will display " " and if you apply blood too soon. Please

repeat the test with a new test strip.

- Record the date of opening a new test strip vial for the first time. Discard the vial of

test strips after 3 months from opening.

" "

- Always keep the metal contact points of the test strip entry point clean. If any dust

or impurities are present, please clean with a small soft brush, otherwise the meter

may not work correctly when you insert a test strip.

13a

Test Strips

2009.10.01

13b

13c

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Sem comentários

BIONIME GM550 Manual do Utilizador Página 14