BIONIME GM550 Manual do Utilizador descarregar pdf (Página 9)

1716

Meter activation and Battery Change

1. Turn the meter over. Press and

push battery cover to open.

PRECAUTION

- Please follow the local regulation and discard a used battery properly.

4. The meter performs a self test.

5. Press any button to exit the self-test and enter Setting Mode.

6. Set the time and date when the batteries are replaced. See Chapter "Setting up your meter -

setting the time, volume and date". Test results are still stored in the memory.

3. Slide the battery cover

back until it snaps into

place.

2. Install the batteries. Be sure to

put battery in correct direction.

Meter activation and Battery change

Your meter comes with two CR2032, 3volt, batteries installed. Two new batteries will provide power to

perform about 1000 tests under normal use. You can press the main button or insert a strip to

activate your meter.

NOTE

- When meter backlight has no function, you cannot see the backlight, please change your

backlight battery.

- When the backlight battery is running out of power, your meter still works properly but

without backlight function.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Sem comentários

BIONIME GM550 Manual do Utilizador Página 9